Mastertac Technical Information

31.10.2013 ENG 253
A4 FilmicsAGS (sales code)
ProductWhite, heat stabilized, matt coated computer imprintable polyester film.
UseInformation labelling where overprinting is made by laser or thermal transfer. Recommended for drum and logistics labelling.
Typical technical values
75 g/m² ISO 536
58 µm ISO 534
Elongation MD
150.0 % DIN 53455
Elongation CD
130.0 % DIN 53455
88 % DIN 53146/1
PrintabilityDue to the pre-treatment, the film is printable by common label printing methods like letterpress, flexography, screen and offset. Special inks designed for non-absorbent materials should be used. Laser and copier.
Shelf lifeTwo years from the date of manufacture in +20°C and RH 50%.
The performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.

   Download printable version:

   « Previous page