Mastertac Technical Information
23.01.2018 ENG 263
98-H (sales code)
Strong universal permanent for sheets.
Modified acrylic dispersion.
For applications where very high initial adhesion to rough surfaces is required. Very good resistance to edge-lifting (=flagging). Recommended for curved surfaces and corrugated cardboard. Good heat resistance.
Typical technical values
Labelling temperature min
Service temperature min
Service temperature max
Due to adhesive nature we are recommending to take special attention when guillotining: lower stack height, more frequent knives cleaning, using of silicone spray to keep blades free from adhesive build-up.
Approval: The research centre ISEGA has given the adhesive approval for direct contact with dry and moist non-fatty foods.
From the date of manufacture 4 years in +20 ºC and RH 50%.
The performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.
Download printable version: